Customizing Your Phone - Yealink SIP-T41P Configuration Manual

If your phone cannot contact a DHCP server for any reason, you need to configure
network settings manually. The IP phone can support either or both IPv4 and IPv6
addresses. If your phone can not contact a DHCP server for any reason, you need to
configure a static IP address.
To configure the IP address mode via CommPortal phone configurator:
1. Click on Network >IP Setting.
2. Select IPv4, IPv6 or IPv4 & IPv6 from the Internet Port Mode(IPv4/IPv6) field.
3. Click Save changes to accept the change.
4. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to
Configuration Files
To configure a static IPv4 address via CommPortal phone configurator:
1. Click on Network >IP Setting.
Make sure that the IP address mode is configured as IPv4 or IPv4 & IPv6.
2. Select Static IP Address from the Internet Port Type for IPV4 pull-down list.
on page 7.

Customizing Your Phone

Downloading
11