Yealink SIP-T41P Configuration Manual page 28

Yealink IP Phones Configuring Guide
The default value is Disabled.
8. Click Save changes to accept the change.
9. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to
Configuration Files
To the directory via phone user interface:
view
1. Press the Dir soft key when the phone is idle.
The enabled list(s) will be ordered from highest priority to lowest.
Note
If Remote Phone Book, LDAP , Network Contacts and Network Call List are not configured
in advance, you cannot see them on the phone user interface.
For more information on Remote Phone Book, refer to
For more information on the LDAP , refer to
Administrator Guide
Yealink SIP Phones Integrated with Metaswitch CommPortal Phone
List, refer to
Applications User Guide.
You can add new contacts to the local directory, search for a contact, or simply dial a
contact number from the remote phone book.
You can configure your new phone to access up to 5 remote phone books. For the
access URL of the remote phone book, contact your system administrator.
To configure an access URL for a remote phone book the CommPortal phone
configurator:
1. Click on Features->Remote Phone Book.
20
on page 7.
Yealink SIP-T2 Series T4 Series IP Phones
. For more information on the Network Contacts and Network Call
Downloading
Remote Phone Book on page 20.