Yealink SIP-T41P Configuration Manual page 20

Yealink IP Phones Configuring Guide
3. Enter the desired values in the Static IP Address, Subnet Mask, Gateway, Primary
DNS and Secondary DNS fields respectively.
4. Press the Save soft key to accept the change.
5. Perform auto provisioning on the phone to download above configurations. For
more information on how to perform auto provisioning, refer to
Configuration Files
To configure a static IPv6 address via CommPortal phone configurator:
1. Click on Network >IP Setting.
Make sure that the IP address mode is configured as IPv6 or IPv4 & IPv6.
2. Select Static IP Address from the Internet Port Type for IPV6 pull-down list.
3. Enter the desired values in the Static IP Address, IPv6 Prefix, Gateway, Primary DNS
and Secondary DNS fields respectively.
4. Click Save changes to accept the change.
12
on page 7.
Downloading