Programming Cleaning Cycles; Cancelling Cleaning Cycles - Zodiac VX55 4WD Owner's Manual

1. Choose pool cleaning settings to program.
• Choose
floor or the floor and walls of the pool.
• Choose
to Floor Only or Floor and Walls.
• Choose
high intensity level cleaning.
• Choose
2. Press to view current programmed
cleaning cycles.
Cycle day and time is displayed for three
seconds.
3. When the cleaning cycle you want to change
is displayed, press and hold
seconds.
The days of the week flash twice.
NOTE: If the display flashes all zeros, the time has
not been set (new cleaner). Day and time must be set
before you can program cleaning times, see section
5.2 Changing the Clock Day and Time.
4. Press or
through 7 days of the week.
5. Press to select.
Hour setting flashes twice.
6. Press or
through 24 hours.
7. Press to select.
Minutes setting flashes zero.
14
to select either the pool
to select Walls only in addition
to select intensive or
to select pool shape.
for 3 to 5
buttons to cycle
buttons to cycle
8. Press
through four 15- minute increments (00, 15, 30,
or 45).
10. Press
The next day to program flashes.
11. Press
cycle for a different day OR
Press
Days of the week are lit indicating programs
stored in the control box memory for that day.
5.5

Cancelling Cleaning Cycles

To Cancel an Individual Program:
1. Press
The days of the week flash twice.
2. Press
through seven (7) days.
NOTE: If the day of the week flashes with no time
displayed, there is no program set for that day.
H0503800_REV A
or buttons to cycle
to select.
to program an additional cleaning
to exit the programming menu
and hold for 3 to 5 seconds.
or buttons to cycle