Programming Cleaning Cycles; Canceling Cleaning Cycles - Zodiac VORTEX-PRO EC15 Series Owner's Manual

5.4

Programming Cleaning Cycles

You can program up to seven cleaning cycles.
Program cleaning for either seven consecutive cycles or
the same cycle repeated over several weeks
(e.g., every Wednesday and Saturday for three weeks).
1. Choose pool cleaning settings to program.
All models:
Choose
or the floor and walls of the pool.
VX55 4WD:
• Choose
addition to Floor Only or Floor and Walls.
• Choose
high intensity level cleaning.
• Choose
2. Press to view currrent programmed
cleaning cycles.
Cycle day and time is displayed for three
seconds.
3. When the cleaning cycle you want to change
is displayed, press and hold
seconds.
The days of the week flash twice.
NOTE: If the display flashes all zeros, the time has
not been set (new cleaner). Day and time must be set
before you can program cleaning times, see section
5.2 Changing the Clock Day and Time.
4. Press or
7 days of the week.
5. Press to select.
Hour setting flashes twice.
6. Press or
through 24 hours.
to select either the pool floor
to select waterline only in
to select intensive or
to select pool shape.
for 3 to 5
buttons to cycle through
buttons to cycle
7. Press
Minutes setting flashes zero.
8. Press
through four 15- minute increments (00, 15, 30,
or 45).
10. Press
The next day to program flashes.
11. Press
cycle for a different day OR
Press
Days of the week are lit indicating programs
stored in the control box memory for that day.
5.5

Canceling Cleaning Cycles

To Cancel an Individual Program:
1. Press
The days of the week flash twice.
2. Press
through seven (7) days.
NOTE: If the day of the week flashes with no time
displayed, there is no program set for that day.
H0516700_REV C
to select.
or buttons to cycle
to select.
to program an additional cleaning
to exit the programming menu
and hold for 3 to 5 seconds.
or buttons to cycle
15