Program Cleaning Cycles For When You Are Away - Zodiac V3 4WD Instructions For Installation And Use Manual

4. Program cleaning cycles for when you are away
It is not recommended to unplug the power cord once the programmed cleaning cycles have completed
as this will delete the time settings. The time setting will be saved for approximately 2 minutes if the
power cord is disconnected.
4.1. Setting the time
 To set the time, press the
 The days of the week begin flashing:
 Select the current day using the
 Validate using the
 Once the day has been memorised, the hour flashes:
 Select the current hour using the
 Validate using the
 Once the hour has been memorised, the minutes flash:
 Select the current minutes using the
 Validate using the
 The weekly programming setting menu appears, if you only want to set the time you can exit the menu by
pressing or
4.2 Displaying current time and day
 To display the current day, time and minutes, quickly press the
Displaying the current time and day is not possible while the cleaner is running a cycle
4.3 Programming cleaning cycles
‐ You can create up to 7 cleaning cycles, either as 7 cycles in a row, or as the same cycle repeated over
several weeks (example: every Wednesday and Saturday for 3 weeks)
‐ After completion of the 7th cycle the
 Before programming the cleaning cycles, select the type of cycle you need :

V3 4WD :

V4 4WD :
H0402400.A2 EN – 2013‐02
button for a longer time (3 seconds).
and buttons.
button
and
button
and
button
, then the leds
buttons
buttons.
button. Display for 5 seconds:
LED will turn off.
.
8