Hisun HS 400 Owner's Manual page 37

If it is below the "LOWER" mark add brake
3.
fluid .
① Maximum Level
■ Checking brake pedal
CAUTION
TO avoid personal injury:

Stop the engine and chock the wheels
before checking brake pedal.
1. Inspect the
clearance and smooth operation.
Adjust if incorrect measurement is found. (see
checking brake pedal in" EVERY 200 HOURS in
PERIODIC SERVICE section)
① Brake pedal
③ PEDAL STROKE
■ Checking parking brake
Use the parking brake to stop, depress the brake
PERIODIC SERVICE 11-1
② Low Level
brake pedals for
② FREE TRAVEL
pedal to release the park.
Make sure the parking brake warning lamp on the
instrument display goes off when parking brake
lever is released.
① Parking brake pedal
■ Checking Instrument Display lamps
1. Inspect the instrument panel for broken
gauges,
lamps.
2. Replace if broken.
free
■ Checking head light turn signal light etc
1. Inspect lights for broken bulbs and lenses
2. Replace if broken
■ Checking seat belt and ROPS
1. Always check the condition of seat belts and
the ROPS (Roll-Over Protection System)
attaching hardware before operating vehicle.
2. Replace if damaged.
■ Checking the Cv boots
1. Check to see if the Cv boots are damaged or
not.
2. If the boots are cut, gashed or show signs of
deterioration, consult your local dealer.
meters and instrument display