Jack-Up Point - Hisun HS 400 Owner's Manual

Lower the lever to the "DOWN" position to
3.
lower the bed.
4. After making sure that the bed has lowered to
the lowest position, lock it with the restricting
plate.
NOTE:
● Pull up the flip bracket to raise the cargo bed
with the gas spring.
① Flip bracket
② UP
③ DOWN
① Gas Spring Assembly
PERIODIC SERVICE 11-1

JACK-UP POINT

To avoid personal injury, death or vehicle damage:

■ Front End
Jack up at the front bumper only.
① Jack
■ Rear End
Jack up the rear side after placing a wooden block
under the right and left frame tubes for securing the
engine and then supporting it.
Do not jack it up on the steel plate portion directly
under the engine.
① Jack
WARNING
Do not work under the vehicle unless it is
secured by safe
blocking.
② Front bumper
② Front bumper
stands or suitable