Check During Driving - Hisun HS 400 Owner's Manual

Hide thumbs Also See for HS 400:
Table of Contents

Advertisement

STOPPING
■ STOPPING
1.
Release the accelerator pedal
2.
Step on the brake pedal.

CHECK DURING DRIVING

■ Immediately Stop the Engine if:
The
engine
suddenly
accelerates.
Unusual noises are suddenly heard.
Exhaust fumes suddenly become very white.
While driving, check the following items to see if all
parts are functioning normally.
① Coolant temperature gauge
② Fuel gauge
■ Fuel Gauge
Park the vehicle on a flat place.
When the key switch to "START", the fuel gauge
indicates the fuel level.
Be careful not to empty the fuel tank. Otherwise air
may enter the fuel system.
OPERATING THE VEHICLE
slows
down
or
8-5
① Fuel gauge
■ Coolant Temperature Gauge
CAUTION:
To avoid personal injury:
Do not remove radiator cap until coolant
temperature is well below its boiling point.
Then
loosen
pressure before removing cap completely.
With the key switch "ON" the temperature
1.
gauge indicates the temperature of the coolant.
White Zone for "cold" and Red zone for "hot".
2.
If the indicator reaches the Red zone, engine
coolant is overheated. Check the vehicle by
referring to "TROUBLESHOOTING" section.
① Coolant temperature gauge
The hour meter indicates in five digits the hours the
vehicle has been used; the last digit indicates 1/10
of an hour.
cap
slightly
to
relieve

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents