Periodic Service; How To Raise The Cargo Bed - Hisun HS 400 Owner's Manual

Hide thumbs Also See for HS 400:
Table of Contents

Advertisement

PERIODIC SERVICE

CAUTION:
To avoid personal injury:
How to open the Hood and tilt the
seat
CAUTION
To avoid personal injury from contact with
moving parts:
Never open operator's seat while the
engine is running.
Support hood with the other hand while
unlocking support link.
■ Sundry Box Cover
To Open/ Close
To open the hood, turn the latch to release and pull
open the hood.
To close, tilt cover back to closed position and
fasten the latches
① Sundry box cover
■ Operator's Seat
To open the seat, raise the seat to the forward
position.
PERIODIC SERVICE 11-1
① Operator's seat

HOW TO RAISE THE CARGO BED

■ Raising and Lowering the Cargo Bed
◆ To raise the cargo bed
1.
2.
3.
4.
5.
6.
◆ To lower the cargo bed
1.
2.
CAUTION
To avoid personal injury:
When servicing under the raised bed, make
sure safety support is properly mounted.
Do not touch muffler or exhaust pipes while
they are hot, severe burns could result.
Apply the parking brake and start the engine.
Release the restricting plate.
Pull up the hydraulic lift cylinder lever to raise
the cargo bed.
When the cargo bed has been raised, return
the lever to the "NEUTRAL" position.
Stop the engine.
Mount the safety support.
Start the engine and then lift the bed slightly by
operating the lever.
Remove the safety support and store it in the
given location.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents