Stopping the engine
1
Stop the vehicle.
2
Shift the shift lever to P.
3
Set the parking brake. (P. 240)
4
Press the engine switch.
5
Release the brake pedal and check that "ACCESSORY" or "IGNI-
TION ON" on the multi-information display is off.
Changing engine switch modes
Modes can be changed by pressing the engine switch with brake
pedal released. (The mode changes each time the switch is pressed.)
1
Off*
The emergency flashers can be
used.
The multi-information display will
not be displayed.
2
ACCESSORY mode
Some electrical components such
as the power outlet can be used.
"ACCESSORY" will be displayed
on the multi-information display.
3
IGNITION ON mode
All electrical components can be
used.
"IGNITION ON" will be displayed on the multi-information display.
*
: If the shift lever is in a position other than P when turning off the engine,
the engine switch will be turned to ACCESSORY mode, not to off.
HIGHLANDER_U (OM48F09U)
4-2. Driving procedures
229
4