Turn Signal Lever; Turn Signals Can Be Operated When - Toyota 2016 Highlander Service Manual

Turn signal lever

Operating instructions
1
Right turn
2
Lane change to the right (move
the lever partway and release
it)
The right hand signals will flash 3
times.
3
Lane change to the left (move
the lever partway and release
it)
The left hand signals will flash 3
times.
4
Left turn
■

Turn signals can be operated when


Vehicles without a smart key system
The engine switch is in the "ON" position.

Vehicles with a smart key system
The engine switch is in IGNITION ON mode.
■
If the indicator flashes faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned
out.
■
Customization
The number of times the turn signals flash during a lane change can be
changed. (Customizable feature P. 674)
HIGHLANDER_U (OM48F09U)
4-2. Driving procedures
239
4