Memory Recall Function - Toyota 2016 Highlander Service Manual

Memory recall function

Each electronic key can be registered to recall your preferred driving
position.
■
Registering procedure
Record your driving position to button "1" or "2" before performing
the following:
Carry only the key you want to register, and then close the driver's
door.
If 2 or more keys are in the vehicle, the driving position cannot be
recorded properly.
1
Check that the shift lever is in P.
2
Turn the engine switch to IGNITION ON mode.
3
Recall the driving position that you want to record.
4
While pressing the recalled
button, press and hold the
door lock switch (either lock
or unlock) until the buzzer
sounds.
If the button could not be regis-
tered, the buzzer sounds contin-
uously for
seconds.
■
Recall procedure
Carry the electronic key that has been registered to the driving
position, and then unlock and open the driver's door using the
smart key system or wireless remote control.
The driving position will move to the recorded position.
If the driving position is in a position that has already been recorded, the
seat and outside rear view mirrors will not move.
HIGHLANDER_U (OM48F09U)
3-3. Adjusting the seats
approximately 3
165
3