Toyota 2016 Highlander Service Manual page 101

Drive information
● Current fuel consumption
Displays the current rate of fuel consumption
● Average fuel economy (after reset
Displays the average fuel economy since the function was reset,
the engine was started, and the vehicle was refueled, respectively
Use the displayed average fuel economy as a reference.
● Average vehicle speed (after reset
Displays the average vehicle speed since the function was reset
and the engine was started, respectively
● Elapsed time (after reset
Displays the elapsed time since the function was reset and the
engine was started, respectively
● Distance (driving range/after start/after reset
Displays the estimated maximum distance that can be driven with
the quantity of fuel remaining and the distance driven after the
engine was started, respectively.
• This distance is computed based on your average fuel consumption. As
a result, the actual distance that can be driven may differ from that dis-
played.
• When only a small amount of fuel is added to the tank, the display may
not be updated.
When refueling, turn the engine switch off. If the vehicle is refueled with-
out turning the engine switch off, the display may not be updated.
● Eco Driving Indicator
P. 105
● AWD control (if equipped)
Displays the torque distribution between the front and rear axles of
the AWD control system
* 1
: Can be registered to Drive information 1 through 3. (P. 102)
* 2
: Resetting procedures:
• Select a function to be reset using the meter control switches and then
press and hold to reset.
• If there is more than one function that can be reset, check boxes will be
displayed next to those functions.
HIGHLANDER_U (OM48F09U)
2. Instrument cluster
1
*
2
*
/after start/after refuel)
2
*
/after start)
2 1
* *
/after start)
2
* *
)
101
1
*
1
*
1
2