The Image Is Difficult To See; The Image Is Blurry; The Image Is Out Of Alignment - Toyota 2016 Highlander Service Manual

Things you should know
■
If you notice any symptoms
If you notice any of the following symptoms, refer to the likely cause
and the solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle
inspected by your Toyota dealer.
Likely cause
 The image is difficult to see
• The vehicle is in a dark area
• The temperature around the lens
is either high or low
• The outside temperature is low
• There are water droplets on the
camera
• It is raining or humid
• Foreign matter (mud etc.) is
adhering to the camera
• There are scratches on the cam-
era
• Sunlight or headlights are shining
directly into the camera
• The vehicle is under fluorescent
lights, sodium
lights etc.
 The image is blurry
Dirt or foreign matter (such as water
droplets, snow, mud etc.) is adher-
ing to the camera.
 The image is out of alignment
The camera or surrounding area has
received a strong impact.
HIGHLANDER_U (OM48F09U)
4-5. Using the driving support systems
If this happens due to these causes,
it does not indicate a malfunction.
Back up while visually checking the
vehicle's surroundings. (Use the
monitor again once conditions have
been improved.)
To adjust the image on the rear view
monitor system screen. (P. 350)
lights, mercury
Rinse the camera lens with water
and wipe it clean with a soft cloth.
Wash with a mild soap if the dirt is
stubborn.
Have the vehicle inspected by your
Toyota dealer.
297
Solution
4