Changing The Vehicle-To-Vehicle Distance; Vehicle-To-Vehicle Distance Settings - Toyota 2016 Highlander Service Manual

Changing the vehicle-to-vehicle distance

Pressing the button changes the
vehicle-to-vehicle distance as fol-
lows:
1
Long
2
Medium
3
Short
The vehicle-to-vehicle distance is
set automatically to long mode
when the engine switch is turned to
IGNITION ON mode.
If a vehicle is running ahead of you, the preceding vehicle mark will also be
displayed.

Vehicle-to-vehicle distance settings

Select a distance from the table below. Note that the distances shown
correspond to a vehicle speed of 50 mph (80 km/h). Vehicle-to-vehicle
distance increases/decreases in accordance with vehicle speed.
Distance options
HIGHLANDER_U (OM48F09U)
4-5. Using the driving support systems
Long
Medium
Short
Preceding vehicle
mark
Vehicle-to-vehicle distance
Approximately 160 ft. (50 m)
Approximately 130 ft. (40 m)
Approximately 100 ft. (30 m)
271
4