Installation With Latch System - Toyota 2016 Highlander Service Manual

Installation with LATCH system

1
Fold the seatback while pulling
the lever. Return the seatback
and secure it at the 1st lock
position (most upright position).
Move the seat as far back as
possible.
If your child restraint system inter-
feres with a head restraint and can-
not be installed properly, install the
child restraint system after remov-
ing the head restraint. (P. 168)
2
Widen the gap between the seat cushion and seatback slightly.
 Type A
3
Latch the hooks of the lower
straps onto
anchors.
If the child restraint has a top
tether strap, the top tether strap
should be latched onto the top
tether strap anchor.
For owners in Canada:
The symbol on a child restraint
system indicates the presence
of a lower connector system.
HIGHLANDER_U (OM48F09U)
the LATCH
Canada only
1-1. For safe use
67
1