Image Warping Menu - Eiki EK-800U Owner's Manual

DLP Projector — Owner's Manual

Image Warping Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OUTPUT and press
the Enter button to enter the OUTPUT menu. Press the arrow keys (pq) to select 3D Display and press
the Enter button to enter the 3D Display menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
I
tem
PC Mode
H Keystone
V Keystone
H Pincushion
V Pincushion
PICTURE
PC Mode
H Keystone
V Keystone
OUTPUT
H Pincushion
V Pincushion
SETUP
OPTION
Enable PC software to control geometry.
Adjust the keystone horizontally and make a squarer image.
Horizontal keystone is used to correct a keystoned image shape in which
the left and right borders of the image are unequal in length. This is
intended for use with horizontally on-axis applications.
Adjust the keystone vertically and make a squarer image.
Vertical keystone is used to correct a keystoned image shape in which the
top and bottom are slanted to one of the sides. This is intended when for
use with vertically on-axis applications.
Adjust the pincushion horizontally and make a more square image.
Adjust the pincushion vertically and make a more square image.
Image Warping
D
escrIptIon
28
— —
Off
20
20
50
50