Eiki EK-800U Owner's Manual page 61

Input the command format like the below:
telnet ttt.xxx.yyy.zzz 23 (the Enter button is pressed)
(ttt.xxx.yyy.zzz: IP-Address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then press the Enter button, the
RS232 command will be workable.
How to have TELNET enabled in Windows VISTA / 7
By default installation for Windows VISTA, "TELNET" function is not included. But end-user can have it by
way of "Turn Windows features On or Off" to be enabled.
1.
Open "Control Panel" in Windows VISTA.
2.
Open "Programs".
DLP Projector — Owner's Manual
47
— —