Eiki EK-800U Owner's Manual page 56

DLP Projector — Owner's Manual
7.
Press the Menu button on the projector.
8.
Select SETUP → Communications → LAN.
9.
After getting into LAN, input the following:
• DHCP: Off
• IP Address: 10.10.10.10
• Subnet Mask: 255.255.255.0
• Default Gateway: 0.0.0.0
10.
Press the Enter / ► button to confirm settings.
Open a web browser (for example, Microsoft Internet Explorer with Adobe Flash Player 9.0 or higher).
11.
In the Address bar, input the IP address: 10.10.10.10.
12.
Press the Enter / ► button.
The projector is setup for remote management. The LAN/RJ45 function displays as follows.
42
— —