Modes Switch Between "Track" & "Monitor; Storage; Data Load - Coban GPS106A User Manual

Gsm/gprs/gps vehicle tracker
Table of Contents

Advertisement

In this mode, the user can dial up the tracker device to monitor the voice around (please
refer to 6.14.2 for instruction).
6.14 Modes switch between "track" & "monitor"
6.14.1 The default mode is "track" (track mode).
6.14.2 Send SMS command "monitor+password" to tracker device, it will reply "
monitor ok!" and switch to monitor mode, and then call the number in device to
monitor the voice.
6.14. 3 Send SMS command "tracker+password" to tracker device, It will reply "tracker
ok" and restore to track mode.

6.15 Storage

6.15.1 Auto Storage : When the tracker device lost GSM signals or fall offline from
1.
GPRS, tracker will store the tracking position and alerts automatically in the SD card
on the basis of the pre-set condition, when GSM signals get back, all the event alerts
will be auto-sent to the authorized numbers or monitoring platform (server), but the
stored tracking data should be loaded to the monitoring platform via SMS command.
6.15.2 Storage upon times: Send SMS: "save030s005n+password" to the tracker unit, it
will reply "save ok", and will store the lat, long locations every 30 seconds for 5
times. (S: second, m: minute; h: hour).
6.15.3 Multi-Storage:Send sms:"save030s***n+password" to tracker device, it will
reply "save ok".
6.15.4 Storage Clearance: send SMS: "clear+password" to tracker device, it will reply
"clear ok".
6.15.5 Storage Volume: It depends on the capacity of the SD card inserted in the tracker
device;
6.15.6 The stored data in SD card can be copied to computers through card reader, and then
the data route can be checked by importing data in the menu "Data Import" of web
platform www.gpstrackerxy.com

6.16 Data Load

6.16.1 Current date Load: Send SMS: "load+ password" to tracker device, it will reply:
"load ok" if the device is working well under GPRS mode; if not, it will reply
"load fail! Please check gprs" that means device does not work under GPRS
mode.
6.16.2 Specified date Load: Send SMS: "load+ password+ space+ year month date" to
tracker device, it will reply: "load ok" and load the tracking data to the
monitoring platform upon the valid time you choose. For Example: send SMS:
"load123456 20110425" to the tracker device, means to load the tracking data of
25th April 2011 to monitoring platform.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gps106b

Table of Contents