Using The Control Panel - Dell S500 User Manual

Using the Control Panel

10
9
1
IR Receiver
2 Left / Auto Adjust
3
Up / Keystone
adjustment
4
Right / Source
5 Menu
34 Using Your Projector
2
1 3 4
8 7 6
Point the remote control towards the IR receiver
and press a button.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE:
on-screen display (OSD) is displayed.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and
S-Video sources when multiple sources are
connected to the projector.
Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
http://www.pureglare.com.au
5
Auto Adjust does not operate if the