Dell S500 User Manual page 64

4. If you select Store without pressing the Enter button, the system will
keep the original settings.
R —
Press
ESET
W /LAN S
IRELESS ETTINGS
wireless settings. The wireless settings menu provides the following options:
W —
Default option is Connected. Select Disconnected to disable
IRELESS
the wireless connection.
NOTE:
Connect.
DHCP S
ERVER
S IP A
TART DDRESS
address of the DHCP server to the projector connected to the wireless.
E IP A
ND DDRESS
the DHCP server to the projector connected to the wireless.
S M
UBNET ASK
G —
Check the Gateway address with your network/system
ATEWAY
administrator if you configure it manually.
DNS—
Check the DNS Server IP address with your network/system
administrator if you configure it manually.
S —
Press
TORE
settings.
NOTE:
1. Use
Gateway, DNS, and Store.
2. Press the
DNS to set the value. (The selected option is highlighted in blue)
a
b
64 Using Your Projector
to reset network configuration.
( W M
IN IRELESS
It is recommended to use the default settings for Wireless
—
Allows you to enable DHCP server of the wireless.
—
Automatically or manually assigns the Start IP
—
Automatically or manually assigns the End IP address of
—
Configure the Subnet Mask of the wireless connection.
to save the changes made in wireless configuration
button to select IP Address, Subnet Mask,
and
button to enter IP Address, Subnet Mask, Gateway, or
Use and buttonto select the option.
Use and button to set the value.
http://www.pureglare.com.au
)—
Select and press
ODE
to activate