Dell S500 User Manual page 57

D S (
ISPLAY ETTINGS IN
The image settings menu provides the following options:
H P
ORIZONTAL
the image left.
V P
ERTICAL OSITION
image down.
F —
REQUENCY
match the frequency of your computer's graphics card. If you see a vertical
flickering wave, use the Frequency control to minimize the bars. This is a
coarse adjustment.
T —
Synchronize the phase of the display signal with the graphic
RACKING
card. If you experience an unstable or flickering image, use Tracking to
correct it. This is a fine adjustment.
A R
SPECT ATIO
image appears. Options are: Origin, 16:9, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
•16:9 — The input source scales to fit the width of the screen to project a
16:9 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3 image.
Z —
Press
OOM
PC M )—
Select and press
ODE
—
Press
OSITION
—
Press to move the image up and
Allows you to change the display data clock frequency to
—
Allows you to select the aspect ratio to adjust how the
and to zoom and view the image.
Adjust the image scale by pressing
and press
only.
Z N
OOM AVIGATION
Navigation menu.
Use
http://www.pureglare.com.au
to activate image settings.
to move the image right and
to view on your remote control
—Press to activate the Zoom
to navigate the projection screen.
Using Your Projector
to move
to move the
or
57