Enable Wireless On The Projector - Dell S500 User Manual

Enable Wireless on the Projector

In order to use your projector wirelessly, you need to complete the steps below:
1
Install the optional wireless dongle (Optional in S500). See "Installing the
Optional Wireless Dongle" on page 13.
NOTE:
Wireless dongle embedded for S500wi.
2 Connect the power cable to the wall outlet and press the power button.
3
Press the Menu button on your projector control panel or remote control.
NOTE:
Use
4
The wireless connection default is enable. See "Wireless/LAN Settings (in
Wireless Mode)" on page 64.
5
Access the INPUT SOURCE menu, select Multuple Display and then select
Wireless Display on the sub-menu. See "INPUT SOURCE MULTIPLE
DISPLAY" on page 52.
74 Using Your Projector
, , and buttons to navigate and
http://www.pureglare.com.au
to select.