S500 Log in screen
NOTE:
If the IP Address is not detected, enter the IP Address displayed at the
bottom left corner of the screen.
Understanding the Buttons
After a successful log in, the following menu bar appears on the computer screen.
1
2
Item
1
Status Bar
Menu
Minimize button
Close button
2
Controls Toolbar
Full screen
Split 1
Split 2
Description
Displays IP and LOGIN CODE information.
Click to activate the application menu.
Click to minimize the application.
Click to exit the application.
Click to project the image in full screen.
Click to project the image in the upper left
corner of the screen.
Click to project the image in the upper right
corner of the screen.
http://www.pureglare.com.au
S500wi Log in screen
3
Using Your Projector
79