Using The Control Panel - Dell S300wi User Manual

Using the Control Panel

1
10
9
1 Power
2 Up / Keystone
adjustment
3 LAMP warning light
32
Using Your Projector
2 3
4
5
6
8 7
Turns the projector on or off. For more
information, see "Turning Your Projector On" on
page 27 and "Turning Your Projector Off" on
page 27.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
If the LAMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Lamp is reaching its end of usable life
• Lamp module is not properly installed
• Lamp driver failure
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 102 and "Guiding Signals" on
page 108.