Table of Contents
Advertisement
Vehicle front
Console panel
Pin E
Tab D
Vehicle front
Panel
Console
Fastener
Screw
Screw
Cover
Stopper
Pin
Glove
compartment
Pin B
Clip C
Clip B
Tab C
Clip A
Pin A
Screw
Pin
Stay damper
Vehicle front
Mazda CX-7－8
2. Remove the parts in the order of pin B, clip C and tab D
from the vehicle rear.
3. Remove the pin E.
4. Remove the console panel.
Panel removal
1. Remove the selector lever knob.
2. Pull the panel upward, then disengage clips A, clips B and
tabs C.
3. Disconnect the accessory socket connector.
4. Disconnect the seat warmer switch connectors.
(Vehicles with seat warmer system)
5. Remove the panel.
Console removal
1. Remove the covers.
2. Remove the fasteners and screws.
3. Remove the pins A.
4. Remove the console.
Glove compartment removal
1. Press the stay damper in the direction shown by the arrow
and detach it from the glove compartment lid.
2. Bend the stoppers inward to remove.
3. Turn the glove compartment downward and pull the pins.
4. Remove the glove compartment.
Advertisement
Table of Contents
