Table of Contents
Advertisement
6
INSTALLING DLP UNIT
Screw
Bush
Washer
Bracket
Pad protectors
DLP unit
DLP unit
Double-sided adhesive tapes
DLP unit
DLP unit
Bracket
Bush
Washer
Screw
Pad protector
Pad protectors
Pad protectors
1. Remove the bushes (4 locations), brackets (2 locations),
washers (4 locations), and screws (4 locations) from the
DLP unit.
Note
•
The brackets are not used with the installation of this
accessory.
2. Affix the pad protectors to the DLP unit as shown in the
figure.
CAUTION
•
To ensure proper affixing, be sure to degrease the
area where the pad protector is affixed.
3. Affix pad protectors to the DLP unit as shown in the figure.
4. Adhere double-sided adhesive tapes to the top of the pad
protectors.
Mazda CX-7－15
Advertisement
Table of Contents
