Mazda 0000 81 M09 Installation Instructions Manual page 13

LH
Screw
Vehicle front
RH
Sub trunk box
Rear seat back
Rear seat cushion
Trunk end trim
Fastener
Trunk side trim
Tab A
Clip B
Sub trunk box (driver's and passenger's side)
removal
Sub trunk box
1. Remove the cargo sub-compartment.
2. Remove the screws.
3. Remove the sub trunk box.
•
Screw
Vehicle front
Rear seat cushion removal
1. Lift the point A in the direction of the arrow, then remove
the rear seat cushion.
Vehicle front
Trunk end trim removal
1. Remove the fasteners.
2. Pull the trunk end trim upward, then disengage tabs A,
clips B and pins C.
3. Remove the tabs D.
4. Remove the trunk end trim.
Vehicle front
Pin C
Mazda CX-7－13
CAUTION
Need to tighten screws hand tight when re-assembling
the vehicle.