Mazda 0000 81 M09 Installation Instructions Manual page 14

Trunk side trim (passenger's side) removal
Trunk side trim
1. Lift cover to expose screw.
Clip A
2. Remove the screw.
3. Pull the remote handle lever outward and detach clip A.
Screw
Remote handle lever
Vehicle front
4. Remove the screws and fasteners.
Clip A
5. Remove the bolts using 10 mm socket, then remove the
Clip B
cargo net hook.
6. Pull the trunk side trim outward and detach clips A and B.
7. Remove the trunk side trim.
Screw
Trunk side trim
Fastener
Cargo net hook
Vehicle front
Bolt: 4.1－6.1 {42－62, 37－53}
N･m {kgf･cm, in･lbf}
Rear combination light (passenger's side) removal
Nut
Nut: 4.1－6.1 {42－62, 37－53}
1. Disconnect the connectors.
2. Remove the nuts using 10 mm socket.
Connector
3. Remove the rear combination light.
Vehicle front
Rear combination light
N･m {kgf･cm, in･lbf}
Mazda CX-7－14