Table of Contents
Advertisement
Connector
Screws
Vehicle front
Rear scuff plate inner
Tab A
Tab B
Clip C detail
Pin D
Clip C
B-pillar lower trim
Vehicle front
Instrument cluster removal
1. Remove the screws.
2. Disconnect the instrument cluster connector.
3. Remove the instrument cluster.
Instrument cluster
Rear scuff plate inner (passenger's side) removal
1. Pull the rear scuff plate inner upward while detaching tabs
Vehicle front
B-pillar lower trim (passenger's side) removal
Clip A
1. Partially peel back the seaming welt.
2. Pull the B-pillar lower trim outward and detach clips A, C
Locator pin B
3. Remove the B-pillar lower trim.
Clip C
Clip C detail
Mazda CX-7－12
CAUTION
•
The removed instrument cluster should be placed with
the display side up to prevent grease from leaking
from the meters.
GOOD
NO GOOD
A and B, detach clips C, pins D from the body, and then
remove the rear scuff plate inner.
and locator pins B.
Display facing
upward
Display facing
downward
Advertisement
Table of Contents
