Table of Contents
Advertisement
Tie wrap (large)
A/C unit
Dashboard
Harness (H5) 16 pin connector
Audio 24-pin connector
Hazard switch connector
Bolt
Audio unit
Screws
Vehicle front
Vehicle wiring harness
Tie wrap (large)
ⓔ
Tie redundant part
Remove connector cover when connecting
iPod; fit connector cover when iPod is not used
Put iPod connection cable in glove box
(Cable 300 {11.81} from dashboard member)
20. Bundle the harness (H5) redundant part and secure it
Tie redundant part
(Harness (H5))
21. Press in the bundled wiring harness (H5) between the
Vehicle front
22. Install the audio unit in the reverse order of removal.
23. Tighten the harness (H5) GND wire using the vehicle bolt.
Harness (H5)
GND wire
Screws
24. Bundle the redundant part of iPod connection cable and
Antenna cable
Vehicle front
mm {in}
Mazda CX-7－26
using a tie wrap (large).
dashboard and the A/C unit.
• Bolt tightening torque:
6.9 – 9.8 N･m {71.0 – 99.0 kgf･cm・61.0 – 86.0 in･lbf }
secure it to the vehicle harness using a tie wrap (large).
Advertisement
Table of Contents
