Table of Contents
Advertisement
Installation of SIRIUS only
Harness (H5)
(iPod connector)
Harness (H5)
(electro taps)
Sponge
Vinyl tape
Harness tube
(Audio connector)
70 {2.75}
Vehicle front
Vehicle wiring harness
Vehicle front
AUX or Bluetooth H/F
Vehicle wiring
16 pin connector harness
harness
50 {1.96}
Vinyl tape
1. Wrap the iPod connector with the sponge and vinyl tape.
2. Wrap the electro taps (CAN wires for iPod) with the
Sponge
Vinyl tape
3. Cut the harness tube of the audio 24-pin connector as
•
mm {in}
4. Cut the harness tube of the vehicle wiring harness as
•
5. Bend back the harness tube, move the AUX or Bluetooth
•
Harness tube
(Vehicle wiring
6. Wrap the cut harness tube and the vehicle wiring harness
harness)
7. Wrap the cut harness tube and the AUX or Bluetooth H/F
mm {in}
Mazda CX-7－27
sponge and vinyl tape.
shown in the figure.
CAUTION
When cutting the harness tube, be careful not to
damage the wiring harness.
If not, it may cause a short, accident, or fire.
shown in the figure.
CAUTION
When cutting the harness tube, be careful not to
damage the wiring harness.
If not, it may cause a short, accident, or fire.
H/F connector harness, and change the branch point.
CAUTION
Do not apply excessive force to the wiring harness as
it could cause an open circuit.
with vinyl tape.
connector harness with vinyl tape.
Advertisement
Table of Contents
