Tie wrap (large)
Dashboard
Vehicle front
Harness (H5) 16 pin connector (White)
Audio 24-pin connector
Hazard switch connector
Bolt
Audio unit
Screws
Vehicle front
22. Bundle the harness (H5) redundant part and secure it using
A/C unit
23. Press in the bundled wiring harness (H5) between the
Tie redundant part
(Harness (H5))
24. Install the audio unit in the reverse order of removal.
25. Tighten the harness (H5) GND wire using the vehicle bolt.
Harness (H5)
GND wire
Screws
Mazda CX-7-30
a tie wrap (large).
dashboard and the A/C unit.
• Bolt tightening torque:
6.9 – 9.8 N・m {71.0 – 99.0 kgf・cm・61.0 – 86.0 in・lbf }