Sending 2-Tone Call; Sending 5-Tone Call; Sending Dtmf Call; Signaling Combination Setup - AnyTone AT-588 User Manual

Press directly to transmit the pre-stored 5-Tone signaling.
In 5Tone signaling mode,press
"AN---",turn selector knob to select desired digit(caller ID).In
this mode,press
next,press to forward cursor.After editing,press
operate ANI call.
4.
Press

Sending 2-Tone Call

1.
Press and hold key for over 2s to enter general setting menu.
2.
P r e s s / k e y t o c h o o s e
No.03 menu, LCD displays "2TON
XX","XX"indicates the group in the list.
3.
Turn selector knob to select the desired
sending 2TONE group,Press PTT to
transmit selected group.
4.
Total:32groups,00-31,Default:00.
5.
Press
Content and name of 2TONE will be edited by programming
software.
This radio only query edited group or name.If there is
corresponding name for 2TONE,this operation will display 2TONE
corresponding name.

Sending 5-Tone Call

1.
Press and hold key for over 2s to enter general setting menu
for 2s until LCD displays
key to
2.
P r e s s / k e y t o c h o o s e
No.04 menu, LCD displays "5TON
XX","XX"indicates the group in the list.
3.
Turn selector knob to select the desired
sending 5TONE group,Press PTT to
transmit selected group.
4.
Total:100groups,00-99,Default:00.
5.
Press
Content and name of 5TONE will be edited by programming
software.This radio only query edited group or name.If there is
corresponding name for 5TONE,this operation will display 5TONE
corresponding name.

Sending DTMF call

1.
Press and hold key for over 2s to enter general setting menu.
2.
P r e s s / k e y t o c h o o s e
No.05 menu, LCD displays "DTMF
XX","XX"indicates the group in the list.
3.
Turn selector knob to select the desired
sending DTMF group,Press PTT to
transmit selected group.
4.
Total:16groups,00-16,Default:00.
5.
Press

Signaling Combination setup

This function is to improve the level of protecting the radio against
receiving irrelative signal.
General Setting
8
19