Sending 2-Tone Call; Sending 5-Tone Call; Sending Dtmf Call; Signaling Combination Setup - AnyTone AT 778 User Manual

Press directly to transmit the pre-stored 5-Tone signaling.
In 5Tone signaling mode, press
"AN---", turn selector knob to select desired digit(caller ID). In this
mode, press
press to forward cursor.After editing, press
operate ANI call.
4.
Press

Sending 2-Tone Call

1.
Press and hold key for over 2s to enter general setting menu.
2.
Press / key to choose No.03
menu, LCD displays "2TON XX", "XX"
indicates the group in the list.
3.
Turn selector knob to select the desired
sending 2TONE group, Press PTT to transmit selected group.
4.
Total: 32groups, 00-31, Default: 00.
5.
Press
Content and name of 2TONE will be edited by programming
software.
This radio only query edited group or name. If there is
corresponding name for 2TONE, this operation will display 2TONE
corresponding name.

Sending 5-Tone Call

1.
Press and hold key for over 2s to enter general setting menu
2.
for 2s until LCD displays
3.
key to
4.
5.

Sending DTMF call

1.
2.
3.
4.
5.

Signaling Combination setup

This function is to improve the level of protecting the radio against
receiving irrelative signal.
General Setting
Press / key to choose No.04
menu, LCD displays "5TON XX", "XX"
indicates the group in the list.
Turn selector knob to select the desired sending 5TONE group,
Press PTT to transmit selected group.
Total:100groups, 00-99, Default:00.
Press
Content and name of 5TONE will be edited by programming
software. This radio only query edited group or name. If there
is corresponding name for 5TONE, this operation will display
5TONE corresponding name.
Press and hold key for over 2s to enter general setting menu.
Press / key to choose No.05
menu, LCD displays " ", "XX"
indicates the group in the list.
Turn selector knob to select the desired
sending DTMF group, Press PTT to
transmit selected group.
Total: 16groups, 00-16, Default: 00.
Press
8
19