Ctcss Scan; Dcs Scan; High/Mid/Low Power Switch; Compander - AnyTone AT-588 User Manual

3.
When LCD appears
with DCS encode and decode together, turn selector knob or press
Microphone's [ /
decode.
4.
CTCSS:62.5-254.1, Total 51groups; DCS:000N-777I total 1024
groups. N is positive code, is inverse code.
5.
Press any key except
standby status.
Under channel mode,this operation can be temporarily used by user. Once
the radio is turned off or switched to another channel,the temporary setting
will be erased.

CTCSS SCAN

Repeatedly press key until LCD
displays and icons ,then hold
key for 1S to enter into CTCSS scanning.
will stop for 15s then scan again.

DCS SCAN

Repeatedly press key until LCD
displays DCS icons ,then hold
a matching DCS signaling ,it will stop for 15s
then scan again.
iron, it means current channe can be set
] to select desired DCS encode and
, and keys to return into
key for
Shortcut Operations

HIGH/MID/LOW Power switch

Press key until LCD display
then press key to switch between high/
Mid/low power. The LCD appears:
None: Transmit in high power
: Transmit in middle power
: Transmit in low power
Compander (Decrease the background noise and ENHANCE
AUDIO CLARITY)
Compander function will decrease the background noise and enhance
audio clarity, especially in long range communication.
1.
Press key, then press
turn on compander function, repeat
above operation again to turn off
compander function.
2.
When LCD appears
compander in current channel.
3.
When LCD doesn't display
disable compander in current channel.
iron,
key to
iron, enable
iron,
7
15