Table of Contents
Advertisement
2.2.5
Viewing SAS topology
From the Adapter Properties screen, select SAS Topology.
1.
LSI Corp Config Utility
Adapter Properties -- SAS1064E
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVDATA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu
Enter = Select Item -/+/Enter = Change Item
Press <Alt+D> to display device properties, or <Alt+M> to display more keys.
More keys for the SAS Topology display:
C = Clear Device Mappings for Non-Present Devices
R = Refresh SAS Topology
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press
2.
Information about the volume and its member-disks are then displayed.
LSI Corp Config Utility
SAS Topology -- SAS1064E
SAS1064E(02:00:00)
﹂ Enclosure
﹂ IM VOL
Esc = Exit
Alt+D = Device Properties
ASUS PIKE 1064E/1068E
v6.20.00.00 (2007.12.04)
F1/Shift+1 = Help
v6.20.00.00 (2007.12.04)
Device Identifier
Direct Attach Devices
LSILOGICLogical Volume 3000
F1/Shift+1 = Help
Alt+M = More Keys
SAS1064E
20
02:00:00
1.24.00.00-IR
500E0188:01111705
2D.02
Enabled
0
[Enabled BIOS & OS]
Device
Info
Controller
turns off)
2-17
Advertisement
Table of Contents
