Table of Contents
Advertisement
2.2.5
Viewing SAS topology
From the Adapter Properties screen, select SAS Topology, then press
1.
<Enter>.
LSI Corp Config Utility
Adapter Properties -- SAS2008
Adapter
PCI Slot
PCI Address(Bus/Dev)
MPT Firmware Revision
SAS Address
NVDATA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu
Enter = Select Item
2.
Information about the volume and its member-disks are then displayed.
LSI Corp Config Utility
SAS Topology -- SAS2008
PIKE 2008(04:00)
﹂ Controller
﹂ RAID1 VOL
Esc = Exit
Alt+D = Device Properties
You may press <Alt+D> to display device properties, or <Alt+M> to display
more keys.
LSI Corp Config Utility
SAS Topology -- SAS2008
More keys for the SAS Topology display:
Alt+B = Select or deselect a device as the preferred boot device
Alt+A = Select or deselect a device as the alternate boot device
Enter = On a SAS Enclosure or Expander - Expand or Collapse Item
Enter = On a Disk Drive - Turn on the Locate LED (next key press turns off)
ASUS PIKE 2008
v7.05.01.00 (2010.02.09)
F1/Shift+1 = Help
-/+/Enter = Change Item
v7.05.01.00 (2010.02.09)
Device Identifier
Direct Attach Devices
LSI
F1/Shift+1 = Help
Alt+M = More Keys
v7.05.01.00 (2010.02.09)
PIKE 2008
07
04:00
5.00.00.00-IR
500E0180:1280E000
05.02
Enabled
0
[Enabled BIOS & OS]
Logical Volume 3000
Device
Info
Controller
2-19
Advertisement
Table of Contents
