Table of Contents
Advertisement
3.1.3
Red Hat
To install the RAID card driver when installing Red Hat
1.
Boot the system from the Red Hat
2.
At the boot:, type linux dd, then press <Enter>.
- To install or upgrade in graphical mode, press the <ENTER> key.
- To install or upgrade in text mode, type: linux text <ENTER>.
- Use the function keys listed below for more information.
[F1-Main] [F2-Options] [F3-General] [F4-Kernel] [F5-Rescue]
boot: linux dd
Select Yes using the <Tab> key when asked if you have the driver disk, then
3.
press <Enter>.
Main Menu
Do you have a driver disk?
Yes
Select fd0 using the <Tab> key when asked to select the driver disk source.
4.
Press <Tab> to move the cursor to OK, then press <Enter>.
You have multiple devices which could
serve as sources for a driver disk.
Which would you like to use?
ASUS PIKE 1064E/1068E
Enterprise Linux OS
®
No
Driver Disk Source
fd0
scd0
OK
Cancel
Enterprise OS:
®
OS installation CD.
®
3-9
Advertisement
Table of Contents
