Integrated Striping (Is) Volume - Asus LSISAS RAID Card PIKE 1064E User Manual

2.2.3

Integrated Striping (IS) volume

The Integrated Striping (IS) feature provides RAID 0 functionality, supporting
volumes with two to ten disks. You may combine an IS volume with an IM or IME
volume.
To create an IS volume:
Follow steps 1–4 of the section Integrated Mirroring volume.
1.
The Select New Array Type screen appears.
2.
Use the arrow keys to select Create IS Volume, then press <Enter>.
LSI Corp Config Utility
Select New Array Type -- SAS1064E
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu
Enter = Choose array type to create
The Create New Array screen shows the disks you can add to make up
3.
the IS volume. Use the arrow key to select a disk, then move the cursor to
the RAID Disk column. To include this disk in the array, press <+>, <->, or
<Space>.
LSI Corp Config Utility
Create New Array -- SAS1064E
Array Type:
Array Size(MB):
Slot
Num
0
1
2
3
Esc = Exit Menu
SPACE/+/- = Select disk for array or hot spare
2-10
Create Integrated Mirror Array of 2
disks plus up to 2 optional hot spares.
Data on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 10 disks including up
to 2 optional hot spares.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 10 disks.
ALL DATA on array disks will be DELETED!
F1/Shift+1 = Help
Device Identifier
SEAGATE ST336754SS
SEAGATE ST336754SS
SEAGATE ST336754SS
SEAGATE ST336754SS
F1/Shift+1 = Help
v6.20.00.00 (2007.12.04)
v6.20.00.00 (2007.12.04)
IS
102996
RAID Hot Drive
Disk Spr Status
0003 [Yes] [No] ------- ----
0003 [No] [No] ------- ----
0003 [Yes] [No] ------- ----
0003 [Yes] [No] ------- ----
C = Create array
Pred Size
Fail (MB)
35003
35003
35003
35003
Chapter 2: RAID configuration