Table of Contents
Advertisement
2.2.4
Managing Arrays
The LSI Corporation MPT Setup Utility allows you to perform other tasks related to
configuring and maintaining IM and IME volumes.
Refer to this section to view volume properties, manage the hot spare disk,
synchronize the array, activate the array, and delete the array.
Viewing volume properties
To view volume properties:
On the main menu, select RAID Properties.
1.
LSI Corp Config Utility
Adapter Properties -- SAS1064E
Esc = Exit Menu
Enter = Select Item -/+/Enter = Change Item
On the next screen that appears, select View Existing Array.
2.
LSI Corp Config Utility
Select New Array Type -- SAS1064E
View Existing Array
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu
Enter = Choose array type to create
2-12
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVDATA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
F1/Shift+1 = Help
View the existing configuration.
Create Integrated Mirror Array of 2
disks plus up to 2 optional hot spares.
Data on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 10 disks including up
to 2 optional hot spares.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 10 disks.
ALL DATA on array disks will be DELETED!
F1/Shift+1 = Help
v6.20.00.00 (2007.12.04)
SAS1064E
20
02:00:00
1.24.00.00-IR
500E0188:01111705
2D.02
Enabled
0
[Enabled BIOS & OS]
v6.20.00.00 (2007.12.04)
Chapter 2: RAID configuration
Advertisement
Table of Contents
