Viewing And Changing Device Properties - Asus PIKE 1078 User Manual

2.2.4

Viewing and Changing Device Properties

This section explains how you can use the WebBIOS CU to view and change the
properties for adapters, virtual disks, physical drives, and BBUs.
WebBIOS allows you to view information for the LSI SAS adapter. To view the
properties for the adapter, click Adapter Properties on the main WebBIOS screen.
There are two Adapter Properties screens. The following figure shows the first
screen.
The information on this screen is read-only and cannot be modified directly. Most of
this information is self-explanatory. The screen lists the number of virtual disks that
are already defined on this adapter, plus the number of physical disks connected to
the adapter.
If a background initialization is in progress, you can click Background Init
Progress to determine its state of completion. Click Next to view the second
Adapter Properties screen, as shown in the following figure.
The following table describes the entries/options listed on the second Adapter
Properties screen. We recommend that you leave these options at their default
settings to achieve the best performance, unless you have a specific reason for
changing them.
ASUS PIKE 1078 2-31