Manual Tuning - Fm - Roberts classic blutune User Manual

Manual tuning - FM

1. Carefully fully extend the telescopic aerial located on the rear of your
radio.
2. Press and release the On/Off button to switch on your radio.
3. Press and release the Mode button until the FM mode is selected.
4. Rotate the Tuning control to tune to a station. The frequency will
change in steps of 50kHz.
If the radio is tuned to a station of suffi cient signal strength with RDS
information present, then the display may change to show the station
name.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set the Volume to the desired setting.
7. To switch off your radio press and release the On/Off button.
15
3
4
6