Feed Timer - Philips SCD570 User Manual

nightlight
1 To switch the nightlight on the baby unit on, select 'Nightlight' in the menu with the + and -
buttons and press OK to confirm.
2 Use the + and - buttons to choose 'Turn On'. The nightlight symbol Q appears on the display.
3 When the nightlight is on and you want to switch it off, press OK to choose 'Turn Off'.
The nightlight symbol Q disappears from the display
lullaby
1 To play one or more lullabies on the baby unit, select 'Lullaby' in the menu with the + and -
buttons. Press OK to confirm.
2 Press OK again to play the first lullaby. Use the + and - buttons to select one of the lullabies
or 'Play all'.
The display shows the lullaby symbol and the number of the lullaby that is playing. The
,
selected lullaby repeats continuously for 15 minutes, unless you select 'stop' in the
menu (Fig. 14).
If you select 'Play all', all pre-stored lullabies are played for 15 minutes. The display shows the
,
number of the lullaby that is playing.
3 To stop playing, select 'Stop' in the menu and press OK to confirm.

Feed timer

You can set the feed timer to alert you that it is time to feed your baby. The timer can be set from
1 minute to 23 hours and 59 minutes.
1 To open the feed timer submenu, select 'Feed Timer' in the menu. Press OK to confirm.
2 Select 'Set Timer' in the feed timer submenu. Press OK to start setting the timer.
3 Set the hour and the minutes and press OK to confirm.
4 To start the feed timer, select 'xx:xx Start' in the feed timer submenu. Press OK to confirm.
The timer symbol appears on the display and the timer starts counting down (Fig. 15).
5 When the timer has reached 00:00, the feed timer alert goes off, the timer symbol starts
flashing on the display and the message 'TIMER END' scrolls across the display (Fig. 16).
6 To stop the timer, select 'Stop & Reset' in the feed timer submenu and press OK to confirm.
Setting the feed timer repeat
1 To make the feed timer go off after the same set time, select 'Timer repeat' in the feed timer
submenu after you have set the timer. Press OK to confirm.
2 Choose 'Repeat ON' or 'Repeat OFF' and press OK to confirm. The timer repeat symbol
appears on the display (Fig. 17).
3 If 'Repeat ON' is set, the feed timer starts counting down again after you stop the alert.
Setting a feed timer alert
1 To set an alert, select 'Timer Alert' in the feed timer submenu. Press OK to confirm.
2 Choose one of the alert options. The options available are sound only, sound and vibration
and vibration only.
3 Press any key to stop the alert or the alert stops automatically after 2 minutes.
EngliSh
11