Table of Contents
Advertisement
Available languages
Available languages
Menu of the parent unit
navigating the menu
Note: Some menu functions only work when the baby unit and the parent unit are linked.
1
Press the MENU button to open the menu. and to make the first menu option appear (Fig. 9).
2
Use the + button to go to the next option or the - button to go to the previous option. The
arrow on the display indicates the direction you can navigate (Fig. 10).
3
Press the OK button to confirm your selection (Fig. 11).
Note: Press the MENU button if you want to leave the menu without making any changes. If there is no
input in the menu for more than 20 seconds, the menu closes automatically.
Sensitivity
This option in the parent unit menu allows you to set the microphone sensitivity of the baby unit.
The microphone sensitivity determines what noise level the baby unit picks up e.g. you will want to
hear when your baby cries, but you may be less interested in its babbling.
1
Select 'Sensitivity' in the menu with the + and - buttons and press OK to confirm.
2
Use the + and - buttons to increase or decrease the microphone sensitivity. The number of
filled segments shows the sensitivity level selected. Press OK to confirm the setting.
Sensitivity levels and indications
Icon
Feed timer
You can set the feed timer to alert you that it is time to feed your baby. The timer can be set from
1 minute to 23 hours and 59 minutes.
1
To open the feed timer submenu, select 'Feed Timer' in the menu. Press OK to confirm.
2
Select 'Set Timer' in the feed timer submenu. Press OK to start setting the timer.
3
Set the hour and the minutes press OK to confirm.
4
To start the feed timer, select 'xx:xx Start' in the feed timer submenu. Press OK to confirm.
The timer symbol appears on the display and the timer starts counting down (Fig. 12).
5
When the timer has reached 00:00, the feed timer alert goes off, the timer symbol starts
flashing on the display and the message 'TIMER END' scrolls across the display (Fig. 13).
6
To stop the timer, select 'Stop & Reset' in the feed timer submenu and press OK to confirm.
Sensitivity
Description
highest
Hear everything from your baby. The speaker of the
parent unit is continuously on.
high
Hear all sounds from soft babbling and louder. If your
baby does not make any sound, the speaker of the parent
unit is off.
medium
Hear sounds from soft cries and louder. If your baby
makes softer sounds, the speaker of the parent unit does
not go on.
low
The speaker of the parent unit only goes on if the baby
makes loud sounds, for instance because it is crying.
EngliSh
9
Advertisement
Table of Contents
