Overview Functions Combi Mode - Bernina 880 Manual

Functions - Display

Overview Functions Combi mode

Font size in alphabets
⦁ select Alphabet
►
font size is 9 mm
⦁ touch icon
►
small «A» is activated
►
the font size is reduced
Mirror Image left/right
The sewing computer sews the stitch pattern mirrored,
left/right referring to the sewing direction.
Mirror Image up/down
The sewing computer sews the stitch pattern mirrored
up/down referring to the sewing direction.
Altering the pattern length
⦁ move the slider in the Display using the
Touchscreen pen or the finger
►
pattern length (Standard = 100%) is infinitely
variable
⦁ extend or shorten in 1%-steps using «+»/«-»-icons
or
⦁ touch the «+100%»-icon
►
the pattern length is extended in 100%-steps
Maximum length is 1000%, shortest length 10%. Some
stitch patterns are limited and cannot be extended to
1000%.
Multi-Directional sewing
⦁
use the stitch width knob to rotate the stitch pattern
or combination in 0.5°-steps, the stitch length knob
for 1°-steps or the «Direct-selection»-buttons for
rotating in 45°-steps into the desired direction
►
the sewing direction is shown in the left part of the
Display
►
the start is marked with a white dot the end with a
red cross
►
the function only appears if the selected stitch can
be sewn in multiple directions
48
⦁
⦁
⦁
Combination mode
1 Font size in alphabets
2 Mirror Image left/right
1
3 Mirror Image up/down
4 Altering the pattern length
2 3 4
5 Multi-Directional sewing
6 Long stitch (without alphabets)
5 6
7 Deleting
8 Editing a combination at cursor position
7 8 9
9 Editing the whole combination
10 Balance
11
10
11 Balance BERNINA Dual Transport
12 Permanent reverse sewing
13 Backstepping
12 13
034791.51.04_2014-02_Manual_B880_EN
touch the «Combi mode»-icon
select stitch pattern
touch the «i»-icon
Long stitch (without alphabets)
̶ the sewing computer sews every second stitch
(max. stitch length 12 mm)
̶ applicable for practical and decorative stitches
Exception: alphabets
Deleting
Deletes an individual stitch.
Editing a combination at cursor position
⦁
touch the icon
►
Display appears
Editing the whole combination
⦁ touch the icon
►
Display appears
Balance
To balance forward and reverse stitches.
Balance BERNINA Dual Transport
Adjusting the feed of the upper fabric layer.
Permanent reverse sewing
The sewing computer sews the selected stitch pattern
in reverse.
Backstepping
The last 200 needle penetrations of a stitch pattern are
retraced, i.e. sewn backwards.