Motifs
Absolute Embroidery check
178
By using the Touchscreen pen or finger, any position within the motif can be
selected directly in the «Edit»-screen.
⦁
select and edit motif
⦁
attach the respective hoop
The the «Motif center»-icon must be deactivated in order to apply the Absolute
check.
⦁
check the motif within the hoop by using the Touchscreen pen
⦁
select any point in the motif with the Touchscreen pen
►
the cursor (marking the needle position) moves to the selected area
►
if the icon «Virtual positioning» 1 is activated (yellow-framed), the hoop is
1
moved to position the needle over the selected area
Checking the motif size
The «Check motif size»-function reads the attached hoop size and stitching
area:
⦁
touch the «i»-icon
⦁
touch the «check»-icon
⦁
select the four corners using the arrow icons
⦁
touch the «Motif center»-icon
►
the needle moves to the center position of the motif
⦁
turn the stitch width knob to the left or to the right
►
the motif is moved horizontally
⦁
turn the stitch length knob to the left or to the right
►
the motif is moved vertically
034791.51.04_2014-02_Manual_B880_EN
If the thread breaks, place the Touchscreen pen on the area of the
Display where the thread broke and the hoop moves to that area.