Changing The Filter; Cleaning The Machine - Jura ENA Micro 9 One Touch Instructions For Use Manual

Changing the filter

E After 50 litres of water have flowed through,
the filter will cease to work. Your ENA will
automatically prompt you to change the
filter.
E After two months, the filter will cease to
work. Set the date on the date plate on the
filter holder in the water tank.
E If the CLARIS Blue filter cartridge is not
activated in programming mode, you will
not be prompted to change the filter.
Precondition:
FILTER
c T Press the Maintenance button.
INSERT FILTER
T Remove and empty the water tank.
T Open the filter holder and remove the old fil-
ter cartridge.
T Insert a new filter cartridge into the water
tank, exerting slight pressure.
T Close the filter holder. It will click into place
audibly.
T Fill the water tank with fresh, cold water and
reinsert it.
T Place a receptacle (at least 500 ml) under the
hot-water spout.
k T Press the Rotary Switch.
FILTER RINSING
the hot-water spout.
E You can interrupt rinsing of the filter at any
time by pressing any button. Press the
Maintenance button c, to continue with
rinsing of the filter.
/ is displayed.
READY
, water flows out of
E The water may be slightly discoloured. This
is not harmful to health and does not affect
the taste.
Rinsing of the filter stops automatically.
HEATING
READY

Cleaning the machine

After 180 preparations or 80 switch-on rinses, the
ENA will prompt you to clean it.
CAUTION
If the wrong cleaning agent is used, the machine
could be damaged and/or traces could be left
behind in the water.
T Use only original JURA maintenance
products.
E The cleaning programme lasts approxi-
mately 15 minutes.
E Do not interrupt the cleaning programme.
The quality of cleaning will be impaired if
you do so.
E JURA cleaning tablets are available from
specialized dealers.
Precondition:
CLEAN
c T Press the Maintenance button.
EMPTY TRAY
T Empty the drip tray and coffee grounds
container and reinsert them.
PRESS RINSE
T Place a receptacle under the dual spout.
c T Press the Maintenance button.
, water flows out of the dual
CLEANING
spout.
The operation is interrupted,
.
TABLET
5 Maintenance
/ is displayed.
READY
ADD
de
en
fr
it
nl
es
pt
ru
51